What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
16.06.2025 00:19

For this case there are devices called Metal oxide varistors (MOV).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
How much of lounge pianists playing is from repertoire, and how much is improvised?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
How would you describe modern day Russian society, beyond just politics?
I post the exact comment here.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
He then describes Rainy Season and Lightning.
but this device (an Inductor) … impedes the rapid changes in the current.
What are the best items to buy from a furniture shop?
The other is “what does a “fuse” do?”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Why don't I want to talk to my girlfriend when she loves me a lot? I feel bored.
There are three different concepts here that are getting confused.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
what exactly is a ‘surge’ protector?
How Much Sun Do You Really Need to Get Enough Vitamin D? - Verywell Health
nine
The third is lightning and “how it gets conducted into a home.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
One
What does a fuse do?
What's the gayest thing you have experienced on an only boys sleepover?
This is 'the assistant's answer'
Upvotes:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Why do some straight men like to suck dick but don't find other males attractive?
These devices are installed between the “hot” and “neutral” and protective ground.
A fuse is a non-resetable over current circuit protector.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
What are your funniest "lost in translation" moments if you grew up speaking more than one language?
This one hit behind the barn.
Barnstars:
Edit 2024–10.
Why do narcissists and especially covert narcissists always play the victim?
There are two important concepts here.
It also is a device that limits the change in current flow.
He then describes the function of a fuse.
so, what happens?
the problem then depends on "how fast does the fuse operate?".
A circuit breaker is similar, but is resettable.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then asserts :
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is where this question deviates from being a 'generic' question, and becomes more specific.
But… the neutral is now “floating” because of the 1 ohm resistance.
But it can get overloaded, and no longer works.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It seems Mohan does not understand the difference between a comment and an Answer.
(Dc diagram shown, AC is similar).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The MOV will conduct when the voltage exceeds 50% of line voltage.
In schematic diagrams this is the symbol for a fuse:
These are simplified answers to the original question, and does not change anything I wrote above.
At one ohm, the resistor has a maximum of 1 watt power.
An AC voltage/ current source, and an ac inductive load.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
The bolt then partially travels down the line to your home.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
First Sentence:
a photo is worth a thousand words.
At least they know the answer if they wanted it.
eight
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–10[John johnson John Johnson ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is where the MOV conducts again, and dissipated the energy.
but I think this circuit , shows a few more pieces.
Now when you have a certain ac resistance, then a current flows in a loop.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
What is lightning?
2024–10–16 [ OO OLAOYE OYEBODE ]
[image of Common-mode choke]
[old diagram got deleted by accident]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This device then solves the entire problem.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).